PRODUCT
HOME > PRODUCTS > Intelligent Kitchen Faucet Series > Manual and Sensor Combined Kitchen Faucet
Intelligent Kitchen Faucet Series
Manual and Sensor Combined Kitchen Faucet
Type: ZY-8966
Certified: NSF/CUPC/CE/CEC

Product Features


Induction controlled : turn-on when sensor, turn-off when sensor again, no need to open the handle, avoid cross infection.

Manual control: independent of induction control, water can still be used normally when power is cut off or induction function fails.

Two sensing modes: long-distance sensing, water open when sensor by hand,water close when hand leave ; Short-distance sensing, water open when sensor, water close when sensor again.

Two water outlet modes: bubble water mode and spray mode, to meet different water needs in the kitchen.
Manual sensing dual water circuit, capable of independently adjusting water temperature.


Product Size


Installation Diagram



Technical Parameters


Item

Technical Specification

Applicable Water

Tap water

Water Temperature

1℃~70°C

Ambient Temperature

1℃~50°C

Working Water Pressure

0.05MPa~0.8MPa

Effluent Flow

6.3L/min (dynamic pressure 0.3MPa)DC6V

Rated Voltage

DC6V

Power

≤3W

Power Supply

AAx4 Battery/ Power Adapter: input AC100-240V(can be customized), output DC6V

Induction Mode

Infrared Induction

Sensing Distance

Short distance sensing mode: sensing on/off ( Distance: 10 + 1cm by
30*30cm white cardboard ;distance ≤ 6cm by hand );

Low Battery Indicator

When the battery voltage is nearly 4.8V + 0.1V, the indicator light and blue
indicator ring flash once every 1 second and stop flash after closing the valve 5
seconds ,then the product works normally;
When the battery voltage is lower than 4.6V + 0.1V, the sensor closes the valve
and enters the under-voltage mode,the sensor indicator flashes 3 times per
second, and the product does not work

Valve Closing When
Power Of

Sensor can self-closing valve in case of power failure when valve opening


Automatic water cut-off
in case of timeout

Long distance sensing mode: after 60s of continuous sensing, the valve will be
automatically closed and water flow will be closed,lfyou want to re-open water,you
should remove the hand or obstacle, and then try to sensor again.
Short distance sensing mode: light fashing and valve opening when hand or obstacle
sensing,meanwhile, the blue indicator lights up for 0.5s, the hand or obstacle leaves
without closing the valve;
After 9Os, the valve will be closed automatically and water is closed, if the hand or
obstacle senses again within this 90 seconds,water will be stopped,meanwhile the
blue indicator lights up for 0.5s.
Time eror above:+ 10%.

Outlet Mode

Stream Mode/Spray Mode; ;Adjustment angle 150°

Material

Elbow: copper, chrome plated/brushed nickel/electroplated black;
Main body: zinc alloy, chrome plated/brushed nickel/electroplated black
Spray head: engineering plastics, chrome plated/brushed nickel/sprayed matt
black nylon weaving hose

Package&Weight

615x355x90mm;3.8kg/set