PRODUCT
HOME > PRODUCTS > Sensor urinal flusher series > Automatic Urinal Flusher-Concealing
Sensor urinal flusher series
Automatic Urinal Flusher-Concealing
Type: ZY-1044A/D/AD
Certified: CE

Product Features

1. Single chip microcomputer design, automatic induction, two-stage washing, water saving.

2. Four No. 5 alkaline batteries are used 100 times a day without replacement within two years. (AC and DC power supply available)

3. Fine drawing, all stainless steel design, with handle.

4. Stainless steel box, all copper solenoid valve: electronic part seal design, waterproof and moisture-proof.

5. It can be adjusted automatically within 30-70cm as required.

6. Ceramic valve core is adopted, and the water output can be adjusted arbitrarily according to the water pressure.

7. It can be removed and washed at any time to avoid blocking.

8. Anti gambling plug pin is installed in the solenoid valve to avoid failure of the solenoid valve.

9. Equipped with manual button to prevent the sensor from being damaged and unable to be used.

10. Installation of concealed wall type, straight up and down, suitable for wall installation above 10cm thick.

11. Wash automatically every 24 hours to avoid peculiar smell caused by water drying in the water trap.


Product size



installation diagram




technical parameter


power supply

4XAA batteries

AC:110v-240V,50Hz-60Hz

DC&AC combined

Applicable water pressure

0.05-0.7Mpa

Applicable water temperature

0.1-60℃

ambient temperature

0.1-45℃

Feedwater caliber

G1/2

Flushing water volume

1.5-4L(10s based on water pressure of 0.3-0.6Mpa)