Product Center
- Intelligent Kitchen and Bath Products Series
- Intelligent Kitchen Faucet Series
- Temperature-adjustable Sensor and Manual combined basin faucet
- Sensor faucet series
- Medical sensor faucet series
- Automatic soap dispenser series
- Sensor urinal flusher series
- Automatic hand dryer series
- Induction flusher series
- Water repellent deodorant floor drain
- Integrated Ceramic Urinal Accessories
- Temperature Adjustable Mixing Valve
Contact Us
Certified: NSF/CUPC/CE/CEC
Product Features
nduction controlled water output: Induction on, then induction off, no need to open the handle to avoid cross infection.
Manual water control: independent of induction water control, it can be used at any time when the power is off or the induction function fails.
Both manual and sensing waterways can independently adjust the water temperature.
Two water outlet modes: bubble mode and shower mode, which can be flexibly switched.
NEOPERL aerator, skin friendly bubbles, fast without splashing
Product Size
Installation Diagram
Installation Diagram
|
Applicable water quality |
tap water |
|
Applicable water temperature |
1°C-70°C |
|
Environmental temperature |
1°C-50°C |
|
Working water pressure |
0.05MPa-0.8MPa |
|
Rated voltage |
DC6V |
|
Standby power consumption |
Standby power consumption ≤ 0.2mW |
|
Power supply mode |
1.AA alkaline battery x4 |
|
Sensing distance |
Sensing distance: 10 ± 1cm, hand sensing distance ≤ 7 ± 1cm) |
|
Delayed valve closing |
90S automatic water shut-off to prevent water resource waste |