Product Center
- Intelligent Kitchen and Bath Products Series
- Intelligent Kitchen Faucet Series
- Temperature-adjustable Sensor and Manual combined basin faucet
- Sensor faucet series
- Medical sensor faucet series
- Automatic soap dispenser series
- Sensor urinal flusher series
- Automatic hand dryer series
- Induction flusher series
- Water repellent deodorant floor drain
- Integrated Ceramic Urinal Accessories
- Temperature Adjustable Mixing Valve
Contact Us
Certified: CE
Product Features
1. MCU design, automatic induction.
2. Four No. 5 alkaline batteries are used 100 times a day without replacement within two years.
3. 304 stainless steel brushed panel.
4. Stainless steel box, all copper solenoid valve, electronic part sealing design, waterproof and moisture-proof.
5. It can be adjusted in the range of 30-70cm as required.
6. According to the water pressure, the water output can be adjusted at will.
7. It can be removed and washed at any time to avoid blocking.
8. The solenoid valve is equipped with anti blocking design to avoid failure of the solenoid valve.
9. Concealed wall type, straight up and down, suitable for wall installation above 10cm thick.
10. Wash it automatically every 24 hours to avoid peculiar smell caused by water drying in the water trap.
Product size
installation diagram
technical parameter
|
power supply |
4XAA batteries |
|
AC:110v-240V,50Hz-60Hz |
|
|
DC&AC combined |
|
|
Applicable water pressure |
0.05-0.7Mpa |
|
Applicable water temperature |
0.1-60℃ |
|
ambient temperature |
0.1-45℃ |
|
Feedwater caliber |
G1/2” |
|
Flushing water volume |
1.5-4L(10s based on water pressure of 0.3-0.6Mpa) |