PRODUCT
HOME > PRODUCTS > Sensor urinal flusher series > Induction urinal rinser
Sensor urinal flusher series
Induction urinal rinser
Type: ZY-1070D/A/AD
Certified: CE

Product Features

1. Single chip microcomputer design, automatic induction, two-stage washing, water saving.

2. Four AA alkaline batteriesare used 100 times a day without replacement within two years. (AC and DC power supply available)

3. Fine drawing, all stainless steel material design.

4. Stainless steel box, all copper solenoid valve: electronic part seal design, waterproof and moisture-proof.

5. It can be adjusted automatically within 40-75cm as required.

6. It can be removed and washed at any time to avoid blocking.

7. Anti gambling plug pin is installed in the solenoid valve to avoid failure of the solenoid valve.

8. For flow regulation, turn the throttle clockwise to reduce the flow of outlet water, and turn the throttle anticlockwise to increase the flow of outlet water;

9. The water quality filter valve body is equipped with filter elements to prevent impurities in the water from affecting the operation of the solenoid valve. The filter screen cover can be unscrewed and the filter screen can be taken out for cleaning;

10. When the low-voltage alarm battery voltage is 4.5 ± 0.1V, the undervoltage indicator light flashes intermittently and quickly, and the solenoid valve stops working

11. Wash automatically every 24 hours to avoid peculiar smell caused by water drying in the water trap.


Product size




installation diagram




technical parameter


External power supply

DC: 4 AA alkaline batteries

AC:110v-240V,50Hz-60Hz

AC / DC optional

Sensing distance

40-75cm adjustable

Effluent flow

0-4l (primary water outlet cycle under 0.24Mpa water pressure)

ambient temperature

0.1-45℃

Water supply diameter

G1/2”

working life

≥ 300000 times